Addiesdive AD2099 Review – Quirky Sweep-Seconds Field Watch
The Addiesdive AD2099 is one of the brand’s later ultra-budget releases, and it immediately stands out because of one unusual dial choice. This is a quartz field-style watch powered by the Seiko VH60 movement, giving it a sweeping seconds hand and a recessed 24-hour subdial at 6 o’clock.
At around $80 before tax, the broader specification is strong. You get a stainless steel case, stainless steel bracelet, boxed mineral crystal with anti-reflective coating, signed screw-in crown, screw-down caseback, signed milled clasp, and 100 meters of water resistance. This isn’t the first time we’ve seen Addiesdive lean into this style of design and finishing.
Design & Case
The AD2099 measures 36.7mm in diameter, 11.2mm thick, and 44.4mm lug-to-lug. That keeps the watch very wearable and almost unisex in character. On my 6.5-inch wrist, there are no overhangs at all, and the watch should work from around 4.5 inches in wrist circumference and upwards.
The lug width is 19mm, which is not quite standard, and the bracelet tapers down to 16mm at the clasp. That taper helps preserve the compact, field-watch proportions.

The case is mostly polished, with brushed lug hoods that integrate nicely with the bracelet end links. From the side, the polished flank has a slightly convex, almost plump shape, giving the watch a pebble-like fluidity.
The transitions remain visually crisp. The lugs turn down aggressively, helping the watch sit close to the wrist, and while the lug tips look sharp visually, everything feels smooth to the touch. Buyers specifically looking for an Everyday Watch may want to compare this against other examples in the category.
Movement & Crown
Inside the AD2099 is the Seiko VH60 quartz movement. It is similar in character to the VH31 because it gives the watch a sweeping seconds hand, but here it also brings that extra 24-hour register at 6 o’clock.
The movement gives the dial a more mechanical-looking seconds sweep than a standard ticking quartz watch. That suits the field-style layout, because the main timekeeping remains clean and easy to read.

The 24-hour subdial is the quirk. It shows the same time in 24-hour format, so unless that is useful to you, it functions more as a visual complication than a necessary one. Still, it adds character and gives the watch more personality than a plain three-hander.
The crown is signed, screws in, and measures 5.9mm across. Together with the screw-down caseback, it supports the AD2099’s stated 100 meters of water resistance.
Bezel
The Addiesdive AD2099 has a tall polished fixed bezel sitting above the convex polished case flank. It supports the boxed mineral crystal and gives the watch a more dimensional profile than the compact case size might suggest.
Some of the 11.2mm thickness comes from that upper construction, with the bezel and tall crystal adding visual height. Even so, the watch still keeps a modest footprint because of the 36.7mm diameter and 44.4mm lug-to-lug length.

The polished bezel works naturally with the mostly polished case. It keeps the front of the watch clean and frames the gloss black dial without adding unnecessary visual noise.
That simple framing also helps the field-style dial remain legible. The bezel, boxed crystal, and brushed rehaut all guide the eye inward toward the numerals and the recessed 24-hour register at 6.
Bracelet
The bracelet is a stainless steel unit with solid links and push-pin construction. At around $65 to $70 before tax, the budget has to show somewhere, and here it shows in the tolerances.

When the bracelet is stretched or flexed, visible gaps open between the links, and they are quite noticeable. Mediocre is the fair word here. It is not a terrible bracelet, but it is clearly still a budget setup.
That said, the actual wearing experience should be better than the tolerances suggest. Link fluidity and articulation are good, and the bracelet moves freely enough to drape comfortably on the wrist.

The clasp is a definite step up. It is a signed milled unit with a double-pusher release, five micro-adjustment positions, and a milled folding wing inside.
Flip the watch over and the screw-down caseback carries the specifications etched into the back. Combined with the screw-in crown, it completes the 100-meter water resistance setup.
Crystal & Dial
The AD2099 uses a tall boxed mineral crystal with anti-reflective coating. I do not mind the mineral crystal here because the profile has real character, with a bit of dome and a strong purple sheen at sharper viewing angles.
Below that crystal is a piano gloss black dial with printed minute chaptering around the periphery. Arabic numerals run from 1 through to 12, giving the watch that classic field-watch legibility.

At 6 o’clock sits the recessed 24-hour register. Visually, it works well. It adds another layer to the dial without overwhelming the layout, and because it is recessed, it gives the watch more depth than a completely plain three-hand field watch.
Functionally, I still see it as more visual than essential. It repeats the same time in 24-hour format, but it does make the AD2099 more distinctive.

The main hands are edged in chrome, with lume plots through the center. The seconds pointer is a thin chrome hand and is not lumed. Branding is minimal, with only the Addiesdive name in cursive below 12.
The lume setup is genuinely fun. The main hands and Arabic numerals glow bright blue, the minute chaptering gets green lume plots, and the 24-hour subdial hour hand is also luminous.
Summary
The Addiesdive AD2099 is an unusual little watch because the fundamentals are sensible, but the dial adds one very specific quirk. The Seiko VH60 gives it a sweeping seconds hand, while the 24-hour subdial at 6 adds visual interest even if the practical use is limited.
The rest of the package is very strong for around $80 before tax. You get a stainless steel case, stainless steel bracelet, boxed mineral crystal with anti-reflective coating, signed screw-in crown, screw-down caseback, signed milled clasp, and 100 meters of water resistance. At this level of the market, sub $100, buyers have no shortage of alternatives competing for attention.

The compact 36.7mm case, 44.4mm lug-to-lug length, aggressive lug downturn, and 16mm bracelet taper make it easy to wear. The bracelet tolerances are clearly budget, but the articulation is good and the clasp is stronger than expected.
For me, the AD2099 works because the quirk gives it personality. It may not be the most logical subdial, but it makes the watch more interesting.
Addiesdive AD2099 Swpecifications
| Specification | Details |
|---|---|
| Model | Addiesdive AD2099 |
| Dimensions | |
| Case Diameter | 36.7mm |
| Case Thickness | 11.2mm |
| Lug-to-Lug | 44.4mm |
| Lug Width | 19mm |
| Crown | Signed screw-in crown measuring 5.9mm |
| Crown Type | Screw-in |
| Design | |
| Case Material | Stainless steel |
| Case Finish | Mostly polished case with brushed lug hoods and crisp transitions |
| Crystal | Tall boxed mineral crystal with anti-reflective coating and purple sheen at sharp angles |
| Caseback | Screw-down caseback with specifications etched into the back |
| Bracelet/Strap | Stainless steel solid-link bracelet with push-pin construction |
| Bracelet Taper | 19mm to 16mm at the clasp |
| Clasp | Signed milled clasp with double-pusher release, five micro-adjustments, and milled folding wing |
| Bezel | Tall polished fixed bezel supporting the boxed mineral crystal |
| Dial | Piano gloss black field-style dial with recessed 24-hour register at 6 |
| Dial Color | Black |
| Dial Text | Addiesdive name in cursive below 12 |
| Sub-Dials | 24-hour register at 6 showing the same time in 24-hour format |
| Indices | Arabic numerals from 1 through 12 |
| Hands | Chrome-edged main hands with lume plots; thin chrome seconds hand |
| Lume | Blue lume on hands and Arabic numerals; green minute chapter plots; luminous 24-hour subdial hand |
| Water Resistance | 100m |
| Movement | |
| Movement | Seiko VH60 quartz movement |
| Price | |
| Approx. Price | Around $65 to $70 before tax |



























